Fike 100-0002//A - EXTINGUISHING EQUIP Twinflex SRP Remote Status Indicator

Fike, 100-0002, Twinflex SRP Remote Status Indicator

Remote Status Indicator (RSI): The TWINFLEX® Remote Status Indicator connects to a Control Panel and reports events that occur on the system. It does not connect to any detection devices.

The TWINFLEX® RSI can also perform fire alarm system controls over the network (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer). In addition, the RSI can put the system into the Manual Release ONLY operation mode and it can activate a Manual Extinguishant Release.

A maximum of 8 RSI(s) can be connected to a single SRP Control Panel.

The maximum cable length from the SRP Control Panel to an RSI is 500 metres. If 8 RSIs are used, they must all be within the maximum 500 metres cable length.

All external connections are made on the back board.

The Ext. Switches SW1 and SW2 are to be used for the external HOLD and RELEASE functions respectively. SW1 must be a momentary Normally Open switch. SW2 must be a Normally Open switch. If the Ext. Switches are not going to be implemented, then a 3.3KΩ EOL must be used for termination.